Automatic Powder Coating Line Factory Direct Sales

Automated powder coating line can have different speed basing on customer production capacity requirement

Send Inquiry

Description

Automatic Spraying Coating Labor Saving Powder Coating Production line System

(1) The workpiece moves together with the coating chain and passes through the powder coating spraying booth at a constant speed to complete the automatic spraying;

(2) In different process sections, the workpiece completes different pre-treatment processes, such as degreasing, cleaning, phosphating, etc.

Product Description

Spraying pretreatment:

(1) The whole automatic spraying pretreatment tunnel is mainly made of 304 stainless steel with long corrosion resistance.

(2) The liquid in each spraying process is recycled and reused after spraying. There are filters in the recovery channel.

(3) According to the technological requirements, some liquid medicines may need to be heated before spraying.

(4) All the spraying nozzles can be quickly replaced (stainless steel clasps);

(5) According to different requirements of liquid medicine, different types of spraying nozzles and different spraying pressure are selected.

(6) Preventing liquid medicine pollution from each other in different processes by rational design;

(7) The side plates and roofs of the whole spray line are assembled to facilitate transportation and installation on site.

(8) An exhausting fan is installed near the hot water area of the spraying line to prevent steam spillover in the workshop;

(9) All spraying pumps use plastic or stainless steel as required;

(10) All pump outputs are equipped with one-way valves to prevent liquid from returning to damaged seals during shutdown.

product-238-189 product-220-190 product-225-192

The automatic powder coating booth

1. There are many choices for booth materials from the standard level to the top level, including electrolytic galvanized steel, stainless steel, and PVC.

PVC booth is the highest booth system you can choose.

(1) Compared to others including PP booths, PVC booths can be cleaned easily and quickly cause it's hard for powders to stick to the PVC panels.

(2) PP is not good to make a booth, cause it's fragile and inferior weather performance.

2. Booth's bottom can be designed with an IU base to avoid powder accumulation.

3. The booth can be equipped with a cyclone two-stage stainless steel powder recovery system, which can realize clean air direct exhaust indoors, and of course, when changing powder color, you don't need to clean the cyclone system which helps to save time a lot. this system is also highly recommended by our old customers who ever used of it.

PVC powder coat booth powder coat booth system.png

The curing tunnel oven

The curing tunnel oven can be a bridge-type oven or an air curtain-type oven.

Internal multi-point independent adjustable hot air ducts, and to make sure a uniform temperature, several temperature measuring spots are set inside, conducive to uniform heat distribution.

Automatic powder coating guns

Now M2 & S20 powder coating guns are our star products.

Both have high performance in deep groove coatings, included angles coatings, catching Faraday corners, etc.

S20 gun owns 1 world patent and is currently our highest level powder coating gun.

M2 guns own around 80-85% performance of that of S20 guns.

r (3)

Advantages for the automatic conveyor moving labor saving powder coating production line system:
1. High efficiency automatic powder coating line
2. The powder coating booth can be normal SECC panels booth or highest level PVC booth, the booth recovery system can be made of filters or stainless steel cyclone system which can realize fast color change within 15mins

3. Low labor costs and low maintenance

4. Long service life for over 20 years

5. Very cheap spare parts

021 .jpg

.jpg

Packaging & Shipping

Packing Details :

Cartons Or wooden box

packing