The Basic Process Of Powder Curing

The powder curing process used is 180 ° C, baking for 15 minutes, which is normal curing. The temperature and time refer to the actual temperature of the workpiece and the accumulated time to maintain the temperature not lower than this temperature, not the set temperature of the curing furnace and the walking time of the workpiece in the furnace. However, the two are interrelated. When the equipment is initially commissioned, it is necessary to use a furnace temperature tracker to measure the surface temperature and accumulation time of the upper, middle and lower points of the largest workpiece, and adjust the setting temperature of the curing furnace and the speed of the conveyor chain according to the measurement results ( It determines the walking time of the workpiece in the furnace) until it meets the above curing process requirements. In this way, the corresponding relationship between the two can be obtained, so in a period of time (usually 2 months), only the speed needs to be controlled to ensure the curing process.