Knowledge

One of the misunderstandings: the higher the calibration voltage of the powder coating gun, the better the powdering performance. Reason for error: 1.

When purchasing electrostatic powder coating equipment, the following points should be considered: 1. The performance of the equipment. For electrosta

To summarize the reasons why no powder coming out of the spray gun, there are probably the following: 1. The powder outlet of the spray gun is blocked

Sometimes we may meet with the below issues during the powder coating. The powder can be sprayed out of the powder coating gun normally but no powder

When evaluating the powder output from the powder coating gun intuitively, we tend to unconsciously judge that the powder sprayed by the guns is low i

     1. The powder output is smooth, the powder is atomized evenly, and the powder feeding speed is continuously adjustable

1. When the oven runs continuously for a long time (such as the drying tunnel of the spraying line, or the box-type oven can continuously open 4-5 fur

Selection of the heating method (heating energy) of the Oven Heating system classification: 1. Gas-fired hot air heating system (automatic) ---- the b

1. The principle of electrostatic powder coating process: The powder coating is sprayed on the surface of the workpiece with an electrostatic powder m

1. No thinner materials are required, and the construction is non-polluting to the environment and non-toxic to the human body; 2. The coating has exc

The structure type of powder drying treatment chamber can be divided into direct connection drying treatment chamber and bridge type or π-type drying

The structural design scheme of the spray gun must meet the requirements of powder battery charging, and the functional analysis must meet the require